Fieldstone Pinecrest Concrete CoatingsFieldstone Pinecrest Concrete Coatings

Metallic Epoxy Flooring in Pinecrest FL - a swirled finish on a slab that's ready

Tired of a plain gray slab in the garage or living area? We lay a metallic epoxy floor with real depth that suits your space.

Request an estimateQuestions and answers
Glossy metallic epoxy floor with swirling charcoal, silver, and blue patterns reflecting tall windows.
Service
Metallic Epoxy Flooring
Call
(786) 435-0197

How can you tell your floor is ready for metallic epoxy?

  • Dull, stained gray concrete

    Oil spots, tire marks and a dusty surface usually mean the slab has never been sealed or coated, so every spill soaks straight in. The longer it goes, the deeper those stains sit and the more grinding it takes to get the floor clean enough to coat.

  • Old coating peeling up

    Flakes lifting near the door or under the tires usually mean an earlier coating lost its grip, often from thin prep or moisture coming up from below. Left alone, the peeling spreads, and every bit of it has to come off before anything new goes down.

  • Dark, damp-looking patches

    Spots that look wet when nothing spilled usually point to moisture moving up through the slab. That's worth knowing before you fall in love with a color, because a coating laid over a damp slab can lift, and fixing it later means starting over.

Is metallic epoxy right for your Pinecrest floor?

Metallic epoxy flooring is a coating system for concrete, with a colored base coat underneath and a see-through metallic coat on top that gives the floor its swirled, liquid look. For homes and shops in Pinecrest, FL, it turns a plain garage, Florida room or work floor into one that looks poured rather than painted, as long as the slab underneath is ready for it.

Usually the call is about a garage, a Florida room or a shop floor someone's tired of looking at, and they want more movement than a solid color and more color than a polished concrete floor. What moves the price is the size of the floor, the shape the slab is in and how much grinding and repair it needs before any color goes down, while the schedule mostly turns on getting the space cleared and on what the slab tells us about moisture. We're based in Pinecrest and work across the cities around it in Miami-Dade County, where contractors are licensed through the county, and we're licensed and fully insured. Your estimate is where you'll get your own figure, since it comes from your floor and not a guess over the phone.

Details to note before an estimate

  • Rough size of the floor
  • Garage, room or shop to coat
  • Cracks, stains or an old coating
  • Whether the slab sits on the ground
  • How much sun reaches the floor
  • Colors or look you have in mind

How we lay metallic epoxy flooring

It starts with the slab, not the colors. On a ground-level floor I ask about moisture first, because vapor coming up through the concrete is what lifts a coating, and there's no sense choosing a look until we know the slab can hold one. Then we grind the surface so the epoxy has something to bite into, fill the cracks and clear the dust. The base color under the swirl sets the final look, so we pick that together before we start, and then our installers roll out the base coat and work the metallic coat over it into the movement you want. If sun reaches the floor, we talk about a top coat that holds up to it, since epoxy handles UV light poorly and a polyurethane or acrylic top coat is often used over it for that reason. For a busy shop or anywhere that gets wet or oily, one coatings maker recommends a slip-resistant additive, and that's worth deciding before the last coat goes on.

Metallic isn't the only way to finish concrete, and sometimes it isn't the right one. A commercial kitchen or a work area that takes hot water and heavy spills is usually better served by urethane cement flooring, a thick, tough cement-based coating, and if you like the look of bare concrete, polished concrete flooring grinds and shines the slab itself with nothing on top.

Other floors worth comparing

  • Urethane Cement Flooring

    Worth a look for a restaurant kitchen, brewery or workshop where hot water, spills and heavy carts call for a thicker, tougher floor than a decorative coat.

  • Polished Concrete Flooring

    A good fit if you like the look of bare concrete and want a glossy floor without a coating on top.

What happens when you call about metallic epoxy in Pinecrest?

  1. Call or send the form

    Call (786) 435-0197 or send the form with a few notes about your floor. We set a time for me to come out and see it.

  2. I come look at your slab

    I come out myself, check the concrete for cracks, old coatings and signs of moisture, and hear what look you have in mind. You get a written estimate that spells out the prep as well as the finish, so you can see what you're paying for before you decide.

  3. We schedule and lay the floor

    We pick a date that works for you, then our installers do the prep and the coats while I stay on site with them through the job. Clear out what's stored in the space beforehand, since the whole floor gets coated at once.

  4. We walk the floor together

    Before we pack up, we walk the finished floor with you and go over anything you want to ask about. You see it in good light, the same way we do, before we call it done.

Questions before you book metallic epoxy

How much does metallic epoxy flooring cost in Pinecrest?

The price comes down to the size of the floor, how much prep the slab needs and whether moisture has to be dealt with before any coating goes down. A slab with cracks, stains or an old coating to grind off takes more work than clean, sound concrete, and extra colors or a sun-resistant top coat add to it too. One Florida cost guide notes that moisture testing, moisture mitigation, filling expansion joints and moving stored items or vehicles are often quoted separately in Florida, so ask whether a quote includes them before you compare numbers.

How does the base coat color change the look of a metallic epoxy floor?

The base coat shows through the metallic layer, so it sets the overall tone of the floor. Because the top layer is see-through, a white or light base gives a lighter, brighter floor and a black or dark base pulls everything darker. If you have a photo of a floor you like, bring it to the estimate and we'll work back to the base that gets you there.

Does a ground-level slab need a moisture barrier for metallic epoxy?

One maker's guide for its metallic system requires a suitable moisture barrier under a slab poured on the ground. Without one, ground moisture that shifts with the seasons can push too much water vapor up through the concrete, even when an earlier test looked fine. A barrier sits under the concrete where nobody can see it, so if you know anything about when or how your slab was poured, have it handy at the estimate visit.

How long does a metallic epoxy garage floor take to install?

One Florida cost guide describes metallic epoxy in a two-car garage as a two to three day installation. Your floor can run differently depending on its size and how much prep the slab needs, and we'll tell you what to plan around when we write your estimate.

What causes an epoxy floor to lose its gloss or feel soft?

A common cause is amine blush, a film some epoxies form on the surface as they cure when they go down in cool temperatures or high humidity. Blush can weaken the bond between coats and lead to yellowing, softer spots and lower gloss. A coatings maker calls dehumidifiers a very effective way to cut moisture in the air and recommends against fuel-burning heaters, which add moisture and carbon dioxide, so ask any installer how they plan to handle damp air on your job.

Do I need a permit for metallic epoxy flooring in Pinecrest?

The Village of Pinecrest handles plan reviews, inspections and permitting for residential and commercial construction, so it's the office to ask about a floor coating job at a Pinecrest address. Miami-Dade County asks people to check with the county or their own city to learn which permits a job may need. Before we start, we check with the office that covers your address, and if a permit is needed, we handle our side of the paperwork and walk you through the part you sign.

Get a written estimate for your metallic epoxy floor

Send the form and we'll reply within one business day, and most of the time I'm the one who calls you back. I'll come out for a free on-site look at your slab, then write up what the job involves so you can decide with no pressure and no obligation.

Explore our services and areas

Services

Service areas

Book a visit for your metallic floor

You can reach us seven days a week, until 10 PM on weekdays and 11 PM on weekends, and the work is backed by our satisfaction guarantee.

Request an estimateCall (786) 435-0197