Stained concrete flooring in Pinecrest FL - color that soaks into the slab

Bare, dull or peeling concrete? We stain the slab itself and seal it, so the color lives in the floor instead of chipping off.

Red stained concrete patio with a stamped rectangular pattern in a fenced backyard.
Service
Stained Concrete Flooring

How do you know your concrete floor is ready for stain?

  • Paint peeling at doorways

    Your painted concrete is flaking where everyone walks, and bare gray shows through at the thresholds. Paint is a film on top that wears through, so the longer it goes, the more loose paint there is to scrape and grind off before anything new can go down.

  • Bare slab under old flooring

    You pulled up carpet or tile and found gray concrete with glue lines and tack strip holes. Bare concrete soaks up whatever lands on it, so a spill on it today can still show through the stain later.

  • An old stained floor looks dull

    The color looks washed out in the walkways, or spills leave marks where they used to wipe right up. That's usually the sealer wearing away, not the stain, and if you leave it, the bare stain starts wearing too and a simple reseal turns into a bigger repair.

What does it take to stain a concrete floor in Pinecrest?

Stained concrete flooring in Pinecrest means coloring the slab you already have with a stain that soaks into the concrete, then sealing it, so you get a permanent, translucent color instead of a coat of paint that can peel. Most of the job is getting the surface ready and matching the right kind of stain to your floor and the color you want.

Most folks call us after pulling up carpet or tile, or once a painted floor starts chipping, and the first thing I ask is what color you're after, because a gray, a greige, a soft neutral or a bold color points to a water-based stain or dye, while acid stain leans on the minerals already in your concrete. The price and the schedule move mostly with the size of the room, whatever is on the floor now that has to come off and how many colors you want, and the estimate I write up spells out that prep next to the finish so you can see where the money goes. Before we start, we check with the city or county office that covers your address on whether the job needs a permit, and if it does, we handle our side of the paperwork and walk you through the part you sign.

Details to note before an estimate

  • Rough size of each room
  • Old paint, sealer or glue on it
  • Cracks, patches or tack strip holes
  • The color you have in mind

How we do stained concrete flooring

The job starts with getting the concrete bare and clean, because stain takes its color from whatever it touches, and old coatings, glue or grime will show up as blotches. Then we try your stain on a small hidden spot, like inside a closet, so you see the real color on your own slab before we commit the whole room. When we use acid stain, our crew wears full protective gear and keeps the room aired out, since it burns skin and the fumes are hard on lungs. We keep rinse water out of the street drains too, because storm drains around here often carry water to the canals and Biscayne Bay without filtering or treating it. Last, we seal the floor and explain the upkeep, since the sealer is the part you'll be looking after.

Stain isn't the answer for every floor, and I'd rather tell you that at the start than a year in. If you're picturing stone chips set into a smooth, polished surface, terrazzo flooring gets you that look in a way stain can't. If your concrete is in a basement or a lower-level room, we'll talk through basement flooring and what suits the way that space gets used.

  • Terrazzo Flooring

    Pick terrazzo when you want the speckled stone-chip look and more pattern than stain's soft, translucent color can give a floor.

  • Basement Flooring

    A basement or lower-level room often turns into storage, a gym or a playroom, so pick its floor around how you'll use it.

What happens after you call about stained concrete in Pinecrest?

  1. Call us or send the form

    Tell us a little about the floor and the color you're thinking about. We set a time for me to come out and see it in person.

  2. I look at your slab

    I come out myself, check the concrete and tell you plainly what it can and can't take. You get a written estimate that spells out the prep along with the stain and sealer, so you know what each part of the job involves before you decide.

  3. We test, stain and seal

    Our installers start with the test spot and only do the room once you've seen the color. I'm on site with them through the job.

  4. Walk the finished floor together

    Before we pack up, we walk the floor with you and go over how to look after the sealer. Every floor we finish is backed by our satisfaction guarantee.

Questions before you book concrete staining

Is stained concrete the same as painted concrete?

No, stain soaks into the concrete and colors it from within, so the color is permanent and translucent, with the slab's natural variation showing through. Paint sits on top as a film, which is why painted floors peel, chip and wear thin at doorways. If you have paint down now, it has to come off before stain can reach the concrete.

Which concrete stain is best for an older or previously coated floor?

Water-based stain is usually the better pick for an older, worn or once-coated floor, because it doesn't depend on the slab's chemistry. Acid stain works off the minerals in the concrete, so on that kind of floor the color can come out patchy or barely show. Acid stain also needs fully bare concrete, and the usual guidance is to grind old sealers off rather than strip them with chemicals, since strippers leave a residue that keeps the stain from soaking in.

What is the best way to pick a stain color for a concrete floor?

Pick the color first, because it decides the product. A gray, a greige, a soft neutral or a strong color means water-based stain or dye, not acid stain. In a room that gets a lot of sun, dye gives you the exact color you chose but won't hold it in sunlight, while acid stain keeps its color for the life of the slab but won't match a swatch exactly, which is one more reason we test a hidden spot first.

How do I take care of a stained concrete floor?

You take care of the sealer, not the stain. Stain changes the color of the concrete but doesn't protect it, so the sealer on top is what guards against wear, spills soaking in and stains. When the walkways start looking dull, that's usually the sealer wearing, and a fresh coat is the fix.

How much does stained concrete flooring cost in Pinecrest?

It comes down to your floor, so I give you a number after I've seen it instead of guessing over the phone. The biggest swings come from the room size, any old paint, coating or glue that has to come off, and whether you want one color or several. A single color on a clean slab costs less than a multi-color floor on concrete that needs a lot of prep, and the estimate spells out the prep apart from the finish.

Who handles permits for flooring work in Pinecrest?

The Village of Pinecrest handles permits, plan reviews and inspections for all residential and commercial construction, and we check with it before we start on whether your floor needs one. If it does, the application is signed and notarized by you or your representative and by a registered contractor, so we handle our side and walk you through yours. Miami-Dade County has also set aside its separate license categories for concrete finishing and flooring contractors, so don't be surprised if a crew doesn't carry that county card. We're licensed and fully insured.

Tell us about your concrete floor

Call (786) 435-0197 or send the form with the room size, how old the floor is and any paint, coating or glue on it, because that's what tells me which stain your slab will take.